GC GD Two Piece Front Arms

Our 2-piece arms provide extensive caster and camber adjustments. They are also easy to repair if damaged - often, only the compression strut needs replacement.

Note: Fitting these arms on a GC chassis will require some hammering or cutting and welding to fit around part of the frame rail.

We now offer our two piece arms with either our TSS Pin or for a stock ball joint. With the TSS Pin, the steering geometry is lowered by approximately 1.5", necessitating a roll center/bump steer kit. In order to make these arms work with stock ball joints we changed the rod end to a welded fork to resist the forces that would normally break the rod end while braking.

Pictures of our new SBJ 2PA coming soon.

Due to the high adjustability of these arms, we advise having the time and resources to test and fine-tune your alignment.

Please note that these arms are not a direct fit for the GC chassis; a lip on the chassis rail must be hammered or cut away for proper installation.

Arm Extension: We offer arm extensions as well as stock length for all arms. Stock CV’s won’t last at +20mm and won’t work at all for +40 or +60

Powder coating: For custom colors, check out www.prismaticpowders.com. Getting powder coating through us will add another week to your order as this is not an in-house operation. If you choose a custom color, please make a note of what color you would like during check out.