Description
this is a second we had the clamp for stock ball joints did not work well so we cut out the problem and installed out lower 4340 pin and have a kit included to make your own arms if that’s the route you want.
The steering and ball joint roll center are off now so ideally the steering will go under the pocket now that the lower point of geometry is 1.5 further away.
The steering dose not have stock location it will be in board for more angel, also will need to make your own steering rod adapter.
some one can make these work they are a killer piece 4130 and Strenx 100 sheet.
There are no reviews yet.