Blockless Trailing arms

(0) Write a Review
Adding to Trunk… The item has been added


This is our Blockless trailing arm kit that comes with 50mm longer arms and mounts to correct for the longer arm. This will push back the wheel about .25 of an inch in the wheel well. 

The mount has 2 inch over stock and 3 inch over stock mounting points the two stock length arm holes move the stock arm back .25 of an inch. With the longer arm it will support many of the taller lifts with the added radial geometry to not pull the rear wheel really far forward.

The Trailing mount is made of 3/16 A572 G50  a 25% strenth increase over other companys A36 standard. 

The Arms are made of Docal and StrenX 100 from Sweeden this is the primeer materal even stronger and more resiliant than 4130 Chromoly.